2024 Vermeer® Trailed Mowers TM710

Information

2024 Vermeer® Trailed Mowers TM710

Even before you start mowing, you will experience the simplicity of TM710 trailed mowers. It starts at hookup. Connect the hitch, PTO and hydraulics, and you’re ready to go to the field. Narrow transport widths and toolless suspension adjustments help you mow and go. Horsepower requirements (55 hp [40.4 kW]) are an average of 20% lower than comparable 3-pt disc mowers). Plus, it delivers the consistent, clean cut you’ve come to expect from Vermeer trailed mowers.

Features may include:

Easy hitch hookup

Hitch up easily. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it’s ready to go to the field.

Low horsepower requirements

Goes easy on horsepower, only requiring a 55 hp (41 kW) tractor for a 9.2 ft (2.8 m) cut.

Patented rubber torsion design

Absorbs shock loads with a patented rubber torsion design that keeps the weight of the cutter bar on the ground until it needs to float over field obstacles.

Hydraulic swing cylinder

Maneuvers around obstacles with ease, thanks to the hydraulic swing cylinder.

Quick-Clip blade retention system

Replace blades in seconds using the exclusive Quick-Clip™ blade retention system.

Photos

Highlights

  • Rose Bud, Arkansas
  • 2024
  • Vermeer®
  • Trailed Mowers TM710
  • Available
  • Working: 46 in | cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)

Specifications

  • 2024
  • Vermeer®
  • Trailed Mowers
  • TM710
  • General
  • Drive: 540 rpm | recommended: 55 hp
  • Torque Protection: friction disc clutch
  • Rubber torsion
  • 27x9.5-15
  • Disc: 2797 rpm
  • 2 double-acting
  • 1250 psi
  • Rate: 6 gpm
  • Drawbar
  • Disc Diameter: 19.7 in
  • 46 in
  • 9.4 ft
  • 15.3 ft
  • 9.2 ft
  • Working: 46 in | cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
  • 13.6 ft
  • Working: 14.3 ft
  • Total: 2200 lbs | Tongue: 630 lbs
  • Number of Discs: 7 | Number of Blades: 14
  • Curtain: 1 ply 1/8 in rubber
  • Angle: Manual turnbuckle