2024 Vermeer® Trailed Mowers TM610

Information

2024 Vermeer® Trailed Mowers TM610

The TM610 trailed mower offers simplicity from the word GO. The hookup procedure is straightforward: after the hitch, PTO and hydraulics are connected — it’s ready to go to the field. Toolless adjustments make it easy to set the suspension between fields. Maintenance is decidedly simple and horsepower requirements (50 hp [37.3 kW]) are an average of 20% lower than comparable 3-pt disc mowers). Plus, narrow transport widths help you mow and go.

Features may include:

Easy hitch hookup

Hitch up easily. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it’s ready to go to the field.

Low horsepower requirements

Goes easy on horsepower, only requiring a 50 hp (37.3 kW) tractor for an 8.1 ft (2.5 m) cut.

Patented rubber torsion design

Absorbs shock loads with a patented rubber torsion design that keeps the weight of the cutter bar on the ground until it needs to float over field obstacles.

Hydraulic swing cylinder

Maneuvers around obstacles with ease, thanks to the hydraulic swing cylinder.

Quick-Clip blade retention system

Replace blades in seconds using the exclusive Quick-Clip™ blade retention system.

Photos

Highlights

  • Rose Bud, Arkansas
  • 2024
  • Vermeer®
  • Trailed Mowers TM610
  • Available
  • Working: 46 in | cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)

Specifications

  • 2024
  • Vermeer®
  • Trailed Mowers
  • TM610
  • General
  • Drive: 540 rpm | recommended: 50 hp
  • Torque Protection: friction disc clutch
  • Rubber torsion
  • 27x9.5-15
  • Disc: 2797 rpm
  • 2 double-acting
  • 1250 psi
  • Rate: 6 gpm
  • Drawbar
  • Disc Diameter: 19.7 in
  • 46 in
  • 8.3 ft
  • 15.3 ft
  • 8.1 ft
  • Working: 46 in | cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
  • 12.4 ft
  • Working: 14.3 ft
  • Total: 2100 lbs | Tongue: 600 lbs
  • Number of Discs: 6 | Number of Blades: 12
  • Curtain: 1 ply 1/8 in rubber
  • Angle: Manual turnbuckle