2024 Vermeer® Bale Processor BPX9010

Information

2024 Vermeer® Bale Processor BPX9010

Meet the BPX9010 bale processor. Distribute a consistent, uniform windrow of crop along the bunk line or out in the pasture. Or spread bedding with consistency and accuracy at ranges up to 50 ft (15.2 m). This workhorse combines simplicity, durability and versatility — an all-around processor ready to perform a variety of applications.

Features may include:

Slat and chain bale rotation design

The slat and chain bale rotation design feeds the bale consistently into the rotor – reducing the need for reverse rotation.

Toolless cut control bar design

The new toolless cut control bar design allows dual adjustments for increased aggression easily accessible from outside the machine. Ten different settings allow producers to be in control of processing speed and material size.

Rotor cleaner attachment

The rotor cleaner attachment on the cut control bar can be set to the self-cleaning position to help reduce excessive net and twine on the rotor, or set to the manual clean position to help minimize the amount of net or twine mixed in the feed.

Vertical bale lift system

A vertical bale lift system makes it more efficient to load bales and reduce stress on the machine. Plus, the robust T-style tongue frame has no welds or gussets at high stress points and is bolted high on the tub.

Offset rotor

An offset rotor pulls material through for more consistent feeding and helps prevent uncontrolled fall-through from slowing down the machine.

Photos

Highlights

  • Rose Bud, Arkansas
  • 2024
  • Vermeer®
  • Bale Processor BPX9010
  • Available
  • 8.5 ft

Specifications

  • 2024
  • Vermeer®
  • Bale Processor
  • BPX9010
  • General
  • horsepower minimum: 85 hp (63 kW) | horsepower recommended: 100 hp | 1000 rpm
  • horsepower: 210 hp
  • Torque Protection: Shear bolt
  • 14L x 16.1FL
  • Flail Drum: 1000 rpm
  • 3 double-acting
  • 2000 psi
  • rate: 8 gpm
  • Axle: 12 in (30.5 cm) each axle | Bale size capacity: size: (2), 6 ft x 5 ft (1.8 m x 1.5 m) | Flail description: 7/16 in x 5-9/16 in (1.1 cm x 14.1 cm) in tempered spring | Flail Drum Diameter: 26.8 in | Horizontal spread distance: Up to 50 ft (15.2 m)
  • 15.8 ft | Flail Drum: 78 in
  • 8.5 ft
  • 8.2 ft
  • 11.2 ft
  • 5240 lbs | Drawbar: 1480 lbs | capacity: 2500 lbs
  • Bale rotation: 3 roller chains with bolt-on cross slat | Cut Control Bar Quantity: 7
  • Cut Control Bar Adjustment: Hand lever with 5 settings, plus an additional high/low setting
  • Drum: 30
  • Direction: Right hand